Crew working on the rig of a Tramontana yacht

Refit up to 60 m

Refit and rebuild for sailing and motor yachts up to 60 metres, by the people who build them from scratch.

Max LOA
60 m
Scope
Tech · Cosmetic · Full
Dock
Pula

Tramontana refits sailing and motor yachts up to 60 metres at its shipyard in Pula, Croatia. Work ranges from technical refits of engines and systems, through cosmetic refits of paint, teak and interiors, to full rebuilds with new layouts, carried out by the team that builds Tramontana yachts.

Last updated

Scope, space by space

Point at the plan

Pick a deck, then a pin. Each space shows what a Tramontana refit covers there, from a respray to a new layout.

GA · Reposado · 52 m · bow →
Reposado main deck general arrangement

Main deck · 01Aft deck lounge

The first space guests step onto from the tender or the quay.

  • Teak deck
  • Exterior furniture
  • Passerelle and boarding
  • Lighting and AV

Deck plans: Reposado general arrangement, shown for illustration. Every refit starts with a survey of your yacht.

Full refit scope, deck by deck

Sun deck

Sundeck dining & bar
Exterior dining and bar under the sky. The most used space on charter, and the first to show wear. Teak deck re-caulk or renew, Exterior upholstery and cushions, Bar joinery and refrigeration, Awning and shade structures, Exterior lighting.
Fire pit
Gas fire pit set into the deck. Fixtures like this need class-approved installation. Gas system inspection, Fire safety compliance, Surrounding seating and finishes.
Jacuzzi
Deck spa with its own pumps, heating and filtration below deck. Pump and heater overhaul, Shell refinish and waterproofing, Filtration and dosing, Surround and lighting.
Sun pads
Forward sunbathing area around the mast base. Cushions and covers, Drainage and deck hardware, Mast-base fittings.
Foredeck & anchoring
Windlass, chain and the gear that holds 420 GT in place. Windlass and capstan service, Anchor chain survey, Deck fittings and cleats.

Main deck

Aft deck lounge
The first space guests step onto from the tender or the quay. Teak deck, Exterior furniture, Passerelle and boarding, Lighting and AV.
Aft dining
Shaded dining for twelve under the deckhouse overhang. Table and seating, Overhead finishes, Speakers and lighting.
Salon
The main interior volume. Changes here range from new soft furnishings to a full redesign. Interior design and layout, Joinery and veneers, Glazing and blinds, AV and lighting control, HVAC distribution.
Galley
A professional galley built for crewed charter. Commercial appliances, Stainless and surfaces, Extraction and ventilation, Cold stores.
Tender & foredeck
Tender garage and launching gear forward. Tender davit or crane service, Tender replacement, Chocks and lashings.

Lower deck

Beach club
Swim platform and beach club at the waterline. Platform hydraulics, Water toys storage, Shower and finishes.
Engine room
Main engines, generators and the systems that keep her running. Engine overhaul or repower, Generators, Shafts and propellers (in dock), Fuel and bilge systems, Fire suppression.
Master suite
Full-beam owner's suite aft of the guest corridor. Layout and joinery, Bathroom renewal, Soft furnishings, Sound insulation.
Guest cabins
Four double or twin cabins with en-suite bathrooms. Cabin refresh or redesign, Bathrooms and plumbing, HVAC and noise, Lighting.
VIP cabin
Forward VIP suite. Joinery and finishes, Bathroom, Bedding and fabrics.
Crew quarters
Crew cabins and mess forward. Good crew space keeps good crew. Crew cabins and heads, Crew mess, Laundry.
Three levels of refit

Pick the depth

Work included in technical, cosmetic and full rebuild refits
WorkTechnicalCosmeticFull rebuild
Survey & class workIncludedIncludedIncluded
Engines, generators, systemsIncludedNot includedIncluded
Electrical & navigationIncludedNot includedIncluded
Hull & superstructure paintNot includedIncludedIncluded
Teak decksNot includedIncludedIncluded
Interior soft furnishingsNot includedIncludedIncluded
Interior layout changeNot includedNot includedIncluded
Rig & sail handlingIncludedNot includedIncluded
Structural modificationNot includedNot includedIncluded
How a refit runs

Six steps, one yard

  1. 01Survey

    We inspect her afloat or in the dock and list what she needs.

  2. 02Specification

    A written scope you can compare line by line.

  3. 03Quote & slot

    Fixed scope, price and dock dates.

  4. 04Haul-out

    Into the Pula dry dock, onto blocks.

  5. 05Works

    Progress reports and photos as the work moves.

  6. 06Trials

    Class survey, sea trial and handover.

Joiner at work in the Tramontana workshopLaying teak deck by handFit-out inside the hullYacht deck under a work awning

FAQ

Refit questions

What size yachts can Tramontana refit?

Sailing and motor yachts up to 60 metres length overall.

Where does the refit take place?

At the Tramontana shipyard in Pula, Istria, at the top of the Adriatic, with its own dry dock.

What does a refit include?

Three levels: technical (survey, engines, systems, electrical, rig), cosmetic (paint, teak, soft furnishings) and full rebuild (all of the above plus layout and structural changes).

How does a refit start?

With a survey of the yacht, followed by a written specification, a fixed scope with price and dock dates, haul-out, the works, and a class survey and sea trial at the end.